OUTRIGGER CYLINDER (New) HEAVY DUTY Hydraulic Cylinder (6 bore x 30 stroke)

  

This is a brand new outrigger hydraulic cylinder for a 110 ton Terex RT-110 (Rough Terrain) crane. The last 5 picture are for reference only, giving you an ideal of the power of this cylinder and what it is "normally" used for, and shows an actual 110 ton Terex RT-110 with this same cylinder installed at the four corners of the crane. You must realize, the RT-110 weighs in excess of 125,800lbs by itself not including it's rated lifting capacity of 110 tons or 220,000lbs added onto that, and these cylinders will easily lift that entire load off the ground. Will work for other purposes where a VERY HIGH powered hydraulic cylinder is required or for other similar style cranes. You can message me for more pics or measurements if you need them.

Exposed part of the cylinder piston has been coated with an "extended period" rust inhibitor for storage. This rust inhibitor needs to be removed prior use and can be done so by using any SOLVENT based cleaner such as a simple paint thinner like mineral spirits. WD-40 works well for removing the coating also. PLEASE CHECK OUT MY OTHER LISTING FOR NEW HYDRAULIC OUTRIGGER CYLINDERS! This item is in the category "Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Hydraulic & Pneumatic Cylinders".tjk" and is located in this country: US. This item can be shipped to United States.

1. Cylinder Action: Double-Acting
2. Cylinder Type: Single-Rod Cylinder
3. Suitable Media: Hydraulic Fluid
4. Modified Item: No
5. Country/Region of Manufacture: United States
6. Stroke Length: 30 inches
7. Maximum Pressure: 5,500
8. Brand: Terex
9. Bore Diameter: 6 inch